Strumenti per la misura dell’umidità del prodotto

/Strumenti per la misura dell’umidità del prodotto

Strumenti per la misura dell’umidità del prodotto

Categoria: Determine Oil Absorption, Density, Humidity, Moisture
Produttore: Brabender

Intended use

An electronic moisture analyzer that works on the principle of heat drying in circulating air (oven drying method). In this method, the sample’s loss of weight resulting from the drying procedure is determined.

  • Simultaneous analysis of up to 10 samples is possible
  • International and precise (<0.1%) reference methods
  • No material-specific calibration required
  • Easy, error-free operation and maintenance
  • Gentle, uniform drying temperature (up to 200°C) for precise results
  • New web-based MetaBridge laboratory management software
  • Large touch screen, extra ports: for external PCs and HDMI
  • Fully automatic measurement of moisture in the widest range of materials

Electronic and fully automated moisture measurement of TPE, Wood Plastic Composites and a wide range of further materials

With this moisture analyzer, you can measure the solvent or moisture content of up to ten samples at once.

There is no need for calibration, cooling times and the weighing of sample quantities, which results in enormous time savings. Thanks to cooling in the desiccator, distorted results and weighing errors are avoided.

You are able to freely select the desired drying time. Fully automatic reweighing following drying, along with the recording of drying curves, guarantees maximum convenience of use.

And what’s more, the large touch screen means that operation is child’s play. Plus the new, web-based MetaBridge software enables you to access your measurement results across all sites and platforms.

Richiedi Approfondimenti

General Information

From the list of methods, select the desired method, with drying temperature, drying time and sample weight with tolerance range. The precision electronic scales enable you to weigh various sample sizes in the range 1g to 20g.

The sample is placed on the rotary plate and drying begins. The material to be analysed will later be weighed directly in the drying area. Test materials can be inserted at different times, even when other materials are still drying.

  • Thermoplastics
  • Wood plastic composites (WPC)
  • Carbon black
  • Brown coal
  • Fillers
  • Pigments
  • Additives
  • Glas fibers
  • Natural fibers
  • Starch
  • Inorganic minerals
Mains connection 1x 220/230 V; 50/60 Hz + N +PE; 7.5 A
115 V; 50/60 Hz + PE; 14 A
Dimensions (W x H x D) 550 x 680 x 630 mm (without Touchscreen)
820 x 680 x 630 mm (with Touchscreen)
Weight approx. 80 kg net
Drying temperature max. 200°C in the drying chamber
Heating capacity 1100 W
Sample weight min. 1 g, max. 20 g (optional setting of a tolerance range)
Number of samples max. 10 at a time
Measuring range 0.1 to 99,9% water content
Accuracy < 0.1% water content
Display resolution 0.001 g
Reproducibility (balance) ± 0.002 g
Memory parameters
  • Sample position in the drying chamber
  • Sample specifi cation
  • Sample weight
  • Relative loss in weight
  • 10 methods
Data input / output
  • Large touch-screen display
  • USB port for printer
  • HDMI inteface
  • Network (Ethernet) connection
Environmental conditions Temperature: 10 – 40°C

You may also like…